Difficulty
Very easy
Steps
7
Time Required
4 minutes
Sections
2
- Battery
- 4 steps
- Wheel
- 3 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackWowWee CHiP Robot Dog
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Place CHiP on its back so that its stomach is facing you.
Place CHiP on its back so that its stomach is facing you.
1024
Step 2
- There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.
There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.
Step 3
- Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.
Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.
Step 4
- Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.
Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.
Step 5
Wheel
- Locate wheel to replace.
Locate wheel to replace.
Step 6
- Twist grey wheel cap in counter-clockwise rotation.
Twist grey wheel cap in counter-clockwise rotation.
Step 7
- Pull and remove wheel.
Pull and remove wheel.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Joseph Dantes
Member since: 10/02/2018
502 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Linn Benton Community College, Team S1-G5, Johnson Fall 2018
Member of Linn Benton Community College, Team S1-G5, Johnson Fall 2018
LBCC-JOHNSON-F18S1G5
4 Members
5 Guides authored
shawna_beji - Dec 8, 2021
Reply
Why do you have to disconnect the battery before changing the wheel? Can you not just turn off the power and change it?