World Dryer Airforce J4 973A3 Air Filter Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Air Filter
3 steps

Flags

BackWorld Dryer Airforce J4-973A3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Air Filter

In order to change the air filter, start with the removal of the outer metal casing. Use the appropriate security bit.
Using the special bit, remove the large screws at the bottom of the casing.
To remove the case, lift the indicated spot with your hands.
The direction for turning the screws is different than what was indicated on the small sticker above the hole.

In order to change the air filter, start with the removal of the outer metal casing. Use the appropriate security bit.

Using the special bit, remove the large screws at the bottom of the casing.

To remove the case, lift the indicated spot with your hands.

The direction for turning the screws is different than what was indicated on the small sticker above the hole.

1024

Step 2

To access both filters, unscrew all three 1/2" Ph2 screws.
Gently pull the plate away from the black, coarse filter.

To access both filters, unscrew all three 1/2" Ph2 screws.

Gently pull the plate away from the black, coarse filter.

Step 3

After removing the small grey filter, pull on the black, ring-shaped filter to remove it.
We recommend either vacuuming the filters or washing them to remove the dust that has accumulated on the filter.
Leave the filters out to dry for 24 hours before putting it back into use, in order to avoid water damage or electric shock!

After removing the small grey filter, pull on the black, ring-shaped filter to remove it.

We recommend either vacuuming the filters or washing them to remove the dust that has accumulated on the filter.

Leave the filters out to dry for 24 hours before putting it back into use, in order to avoid water damage or electric shock!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Blane Hirsh

Member since: 09/17/2018

260 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Washington State, Team S1-G6, Hope Fall 2018                        

                                                  Member of Washington State, Team S1-G6, Hope Fall 2018 



                    WSU-HOPE-F18S1G6                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team