Difficulty
Very easy
Steps
6
Time Required
10 - 15 minutes
Sections
2
- Blender Blades
- 5 steps
- O-Ring
- 1 step
Flags
0
BackWolf Gourmet WGBL100S
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Blender Blades
- Flip over the pitcher to expose the base of the blade assembly.
- Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.
- Apply a solvent to remove adhesive if necessary.
Flip over the pitcher to expose the base of the blade assembly.
Using the H4.0 Allen key from the 54 bit driver kit, attached to an impact driver, remove the socket head cap screw from the drive coupling.
Apply a solvent to remove adhesive if necessary.
1024
Step 2
- Using a pair of pliers, pull of the drive shaft coupling.
Using a pair of pliers, pull of the drive shaft coupling.
Step 3
- Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.
Using a flat head screwdriver and a mallet, bend down the two tabs holding the large nut.
Step 4
- Remove the nut using a crescent wrench.
Remove the nut using a crescent wrench.
Step 5
- Push the blade assembly into the jar.
- Remove the blades from the device.
- Be careful not to cut yourself when handling the blades.
Push the blade assembly into the jar.
Remove the blades from the device.
Be careful not to cut yourself when handling the blades.
Step 6
O-Ring
- Use tweezers to pull off the o-ring.
- Be careful not to cut yourself while handling the blender blades.
Use tweezers to pull off the o-ring.
Be careful not to cut yourself while handling the blender blades.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Luke Kutz
Member since: 04/19/2018
354 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team S25-G16, Maness Spring 2018
Member of Cal Poly, Team S25-G16, Maness Spring 2018
CPSU-MANESS-S18S25G16
4 Members
5 Guides authored