Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
2
- Back Panel
- 2 steps
- Wireless LAN card
- 3 steps
Flags
0
BackGateway M-460
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Panel
- Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.
Using the Phillips #1 screwdriver, remove the four 6mm screws on the back of the laptop.
1024
Step 2
- Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.
Insert the plastic prying tool and pry the back panel off starting at an edge and moving your way around it.
Step 3
Wireless LAN card
- Use the tweezers to remove the two connecting wires.
Use the tweezers to remove the two connecting wires.
Step 4
- Using the Phillips #1 screwdriver, remove the two 2.5mm screws holding down the card.
Using the Phillips #1 screwdriver, remove the two 2.5mm screws holding down the card.
Step 5
- Lift and pull the Wireless LAN card away from the computer.
Lift and pull the Wireless LAN card away from the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Armani Tayeh
Member since: 03/19/2018
432 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
UMass Dartmouth, Team S3-G2, Peak Spring 2018
Member of UMass Dartmouth, Team S3-G2, Peak Spring 2018
UMASSD-PEAK-S18S3G2
2 Members
14 Guides authored