Difficulty
Difficult
Steps
4
Time Required
3 hours
Sections
1
- Screen
- 4 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackWileyfox Spark Plus
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Screen
- Unscrew the 11 Phillips head screws under the backplate
Unscrew the 11 Phillips head screws under the backplate
1024
Step 2
- Insert a spudger and pry off the join between the screen and the middle frame.
Insert a spudger and pry off the join between the screen and the middle frame.
Step 3
- Pry off the motherboard after removing the ribbon cables and screws, Be careful, as there are wires on either side of the bottom of the board.
Pry off the motherboard after removing the ribbon cables and screws, Be careful, as there are wires on either side of the bottom of the board.
Step 4
- After removing the speaker from the top, flip the phone over and apply heat evenly across the display. Using a suction cup carefully lift off the display
After removing the speaker from the top, flip the phone over and apply heat evenly across the display. Using a suction cup carefully lift off the display
To reassemble your device, follow these instructions in reverse order. Make sure to add the included adhesive.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Meow Meow Meowy
Member since: 01/04/2021
181 Reputation
1 Guide authored
Badges:
3