Difficulty
Moderate
Steps
8
Time Required
15 - 30 minutes
Sections
3
- Foot
- 4 steps
- Back Cover
- 2 steps
- Battery Case
- 2 steps
Flags
0
BackWii Balance Board
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unscrewing the Foot Cover
- Flip device upside-down so the plastic white board is facing the ground.
- Locate the four feet in the corners of the Balance Board.
- Unscrew the three 12.7 mm Phillips screws from each foot cover.
Flip device upside-down so the plastic white board is facing the ground.
Locate the four feet in the corners of the Balance Board.
Unscrew the three 12.7 mm Phillips screws from each foot cover.
1024
Step 2
Removing the Foot Cover
- Remove the gray plastic ring from the actual foot by lifting it up.
Remove the gray plastic ring from the actual foot by lifting it up.
Step 3
Removing the Foot
- Separate the loose foot from the device by lifting it up.
Separate the loose foot from the device by lifting it up.
Step 4
Removing the Additional Feet
- Repeat steps two and three on the remaining four feet.
Repeat steps two and three on the remaining four feet.
Step 5
Unscrewing the Back Cover
- Unscrew the ten 12.7 mm Phillips #1 screws.
Unscrew the ten 12.7 mm Phillips #1 screws.
Step 6
Removing the Back Cover
- Lift off the gray back cover.
Lift off the gray back cover.
Step 7
Battery Compartment
- Locate the gray battery compartment.
- Push the tab on the bottom and lift up completely to remove the cover to the batteries.
Locate the gray battery compartment.
Push the tab on the bottom and lift up completely to remove the cover to the batteries.
Step 8
Removing the Battery Case
- Unscrew the two 6.35 mm Phillips #1 screws.
- Slide the battery case out.
Unscrew the two 6.35 mm Phillips #1 screws.
Slide the battery case out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
15 other people completed this guide.
Author
with 6 other contributors
Michelle Reed
Member since: 09/29/2014
435 Reputation
1 Guide authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 13-8, Forte Fall 2014
Member of Cal Poly, Team 13-8, Forte Fall 2014
CPSU-FORTE-F14S13G8
5 Members
15 Guides authored
Olivia C - Jun 29, 2015
Reply
I unscrewed everything, but were do i find a replacement battery compartent?
CRAIG WIKMAN - Jan 15, 2018
Reply
Then what do you do after you remove the battery case?
Pam Murray - Mar 21, 2018
Reply
Is there a way to open the top of the board by sliding or lifting the top? I bought a gently used wii fit. The lady who sold it to me very quickly opened the top of the board from the centre seam to show me the instruction manual and I think hook up cables. I cannot, for the life of me figure out how she did it! Any ideas or technical wizardry you can share?
Frustrated in Canada!
scottydecept - Sep 23, 2019
Reply
u rock - it totally worked
Valerie Triplin - Nov 20, 2019
Reply
Why tell to remove all those parts and then there’s no replacement battery board