Difficulty
Easy
Steps
6
Time Required
10 minutes
Sections
2
- Foot
- 4 steps
- Back Cover
- 2 steps
Flags
0
BackWii Balance Board
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Unscrewing the Foot Cover
- Flip device upside-down so the plastic white board is facing the ground.
- Locate the four feet in the corners of the Balance Board.
- Unscrew the three 12.7 mm Phillips screws from each foot cover.
Flip device upside-down so the plastic white board is facing the ground.
Locate the four feet in the corners of the Balance Board.
Unscrew the three 12.7 mm Phillips screws from each foot cover.
1024
Step 2
Removing the Foot Cover
- Remove the gray plastic ring from the actual foot by lifting it up.
Remove the gray plastic ring from the actual foot by lifting it up.
Step 3
Removing the Foot
- Separate the loose foot from the device by lifting it up.
Separate the loose foot from the device by lifting it up.
Step 4
Removing the Additional Feet
- Repeat steps two and three on the remaining four feet.
Repeat steps two and three on the remaining four feet.
Step 5
Unscrewing the Back Cover
- Unscrew the ten 12.7 mm Phillips #1 screws.
Unscrew the ten 12.7 mm Phillips #1 screws.
Step 6
Removing the Back Cover
- Lift off the gray back cover.
Lift off the gray back cover.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Cory Olson
Member since: 09/29/2014
849 Reputation
4 Guides authored
Badges:
16
+13 more badges
Team
Cal Poly, Team 13-8, Forte Fall 2014
Member of Cal Poly, Team 13-8, Forte Fall 2014
CPSU-FORTE-F14S13G8
5 Members
15 Guides authored
