Difficulty

Moderate

Steps

11

Time Required

                          15 minutes            

Sections

2

  • The Batteries
  • 1 step
  • LCD screen
  • 10 steps

Flags

3

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • Backwhy! W670SZQ1

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              The Batteries               
  • Unlock the lock latch on the left.
  • Unlock the lock latch on the right.
  • Remove the battery while holding the lock latch unlocked.

Unlock the lock latch on the left.

Unlock the lock latch on the right.

Remove the battery while holding the lock latch unlocked.

1024

Step 2

              LCD screen               
  • Start by locating the two screw caps on the left side of the screen.
  • Remove the lower screw cover.
  • Then the top screw cover.

Start by locating the two screw caps on the left side of the screen.

Remove the lower screw cover.

Then the top screw cover.

Step 3

  • Locate and then remove the first center screw on the top of the screen frame.
  • Then the second central cap on the top of the screen frame.
  • Then locate and remove the screw cap on the upper right side of the screen frame.

Locate and then remove the first center screw on the top of the screen frame.

Then the second central cap on the top of the screen frame.

Then locate and remove the screw cap on the upper right side of the screen frame.

Step 4

  • Then finally the bottom right screw cap of the screen frame.
  • Then unscrew the screws behind the screw caps, starting with the one at the bottom left of the frame.
  • Then at the top left.

Then finally the bottom right screw cap of the screen frame.

Then unscrew the screws behind the screw caps, starting with the one at the bottom left of the frame.

Then at the top left.

Step 5

  • Then the first central screw on the top edge of the frame.
  • Then the second central screw on the top edge of the frame.
  • Then the one in the upper right corner of the frame.

Then the first central screw on the top edge of the frame.

Then the second central screw on the top edge of the frame.

Then the one in the upper right corner of the frame.

Step 6

  • And finally the one on the lower right side of the frame.
  • Then gently use your nails.
  • To remove the frame from the LCD screen.

And finally the one on the lower right side of the frame.

Then gently use your nails.

To remove the frame from the LCD screen.

Step 7

  • Unscrew the screws on the front of the LCD screen.
  • Next, unscrew the screws on the right side of the LCD screen, starting with the first one.
  • Then the second.

Unscrew the screws on the front of the LCD screen.

Next, unscrew the screws on the right side of the LCD screen, starting with the first one.

Then the second.

Step 8

  • Then the third.
  • And finally the fourth.
  • Repeat these operations then on the left side of the screen starting with the first screw.

Then the third.

And finally the fourth.

Repeat these operations then on the left side of the screen starting with the first screw.

Step 9

  • Then the second.
  • Then the third. .
  • And finally the fourth

Then the third. .

And finally the fourth

Step 10

  • Then flip the LCD screen.
  • Then appears the connector to which is attached the connection cable of the LCD.
  • Then peel off the tape covering the connector.

Then flip the LCD screen.

Then appears the connector to which is attached the connection cable of the LCD.

Then peel off the tape covering the connector.

Step 11

  • then remove the cable from its connector.
  • Once the cable is disconnected you can release the LCD screen.

then remove the cable from its connector.

Once the cable is disconnected you can release the LCD screen.

to reassemble your device follow these instructions in reverse order.

Cancel: I did not complete this guide.

        irlanda is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

irlanda

Author

                                      with 1 other contributor 

                    Felice Suglia                     

Member since: 06/15/2013

28,552 Reputation

                                      243 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges