Difficulty
Easy
Steps
9
Time Required
15 minutes
Sections
2
- Battery
- 1 step
- LCD Screen
- 8 steps
Flags
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
Backwhy! W650SZ Laptop
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Slide the latch on the right to the unlocked position.
- Slide the latch on the left to the unlocked position.
- Remove the battery pack from the slot.
Slide the latch on the right to the unlocked position.
Slide the latch on the left to the unlocked position.
Remove the battery pack from the slot.
1024
Step 2
Remove the Bezel
- Although the photos are shown without a keyboard, it is not necessary to remove the keyboard to replace the screen.
- Gently insert your fingernail between the display bezel and the LCD.
Although the photos are shown without a keyboard, it is not necessary to remove the keyboard to replace the screen.
Gently insert your fingernail between the display bezel and the LCD.
Step 3
Remove the Bezel (continued)
- Working your way around the frame, unclip the mounting points of the frame surrounding the LCD screen.
Working your way around the frame, unclip the mounting points of the frame surrounding the LCD screen.
Step 4
Remove the Bezel (continued)
- Remove the bezel surrounding the LCD.
Remove the bezel surrounding the LCD.
Step 5
Remove the Screws Securing the LCD
- Remove the two upper mounting screws securing the LCD to the lid.
- Remove the two lower mounting screws.
Remove the two upper mounting screws securing the LCD to the lid.
Remove the two lower mounting screws.
Step 6
Separate the LCD from the Display
- Cover the keyboard with a cloth, then carefully lower the LCD screen onto the keyboard.
Cover the keyboard with a cloth, then carefully lower the LCD screen onto the keyboard.
Step 7
Disconnect the LCD Cable
- Note the location of the LCD screen connector.
Note the location of the LCD screen connector.
Step 8
Remove the Connector Tape
- Using the plastic tab, peel back the tape securing the LCD cable the panel connector.
Using the plastic tab, peel back the tape securing the LCD cable the panel connector.
Step 9
Unplug the LCD and Remove the Screen
- Unplug the connector.
- The LCD screen can now be removed.
Unplug the connector.
The LCD screen can now be removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Jerry W is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Jerry W
Author
Felice Suglia
Member since: 06/15/2013
28,552 Reputation
243 Guides authored
Badges:
20
+17 more badges