Difficulty
Very easy
Steps
2
Time Required
45 seconds
Sections
- Why! NV41MZ Bottom Cover Replacement
- 1 step
- Why! NV41MZ SSD Replacement
- 1 step
Flags
3
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
Backwhy! NV41MZ
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Bottom Cover
- Remove the 14 screws securing the bottom case to the laptop.
- Unclip the case by sliding a plastic spudger into the slots in the case.
- Remove the bottom case.
Remove the 14 screws securing the bottom case to the laptop.
Unclip the case by sliding a plastic spudger into the slots in the case.
Remove the bottom case.
1024
Step 2
Remove the SSD
- Remove the Phillips screw securing the SSD.
- The SSD board will pop up slightly once the screw is removed. Lift it to relieve any tension and pull it straight out.
Remove the Phillips screw securing the SSD.
The SSD board will pop up slightly once the screw is removed. Lift it to relieve any tension and pull it straight out.
To reassemble your device, follow the instructions in reverse order.
Cancel: I did not complete this guide.
Jerry W is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Jerry W
Author
with 1 other contributor
Felice Suglia
Member since: 06/15/2013
28,552 Reputation
243 Guides authored
Badges:
20
+17 more badges