Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

4

  • Battery
  • 1 step
  • Why! NH57ADS Bottom Cover Removal
  • 2 steps
  • Why! NH57ADS Fan and Heatsink Removal
  • 2 steps
  • Why! NH57ADS CPU Replacement
  • 1 step

Flags

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Better Introduction

Improve this guide by completing or revising its introduction.

  • Backwhy! NH57ADS

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Remove the two screws holding the battery in place.
  • Slip your finger into the finger hole provided at the top of the battery and lift to remove it.

Remove the two screws holding the battery in place.

Slip your finger into the finger hole provided at the top of the battery and lift to remove it.

1024

Step 2

              Bottom Cover
  • Remove the five Phillips screws securing the bottom to the case.
  • Slide the cover up slightly to release the catches holding it in place. This is the view on the right. The mark on the cover should now line up with the second mark on the case of the computer.

Remove the five Phillips screws securing the bottom to the case.

Slide the cover up slightly to release the catches holding it in place. This is the view on the right. The mark on the cover should now line up with the second mark on the case of the computer.

Step 3

              Removing the Bottom Cover
  • This is the view on the left before and after sliding the cover. The mark on the cover should now line up with the second mark on the case of the computer.
  • Lift the bottom cover to remove it.

This is the view on the left before and after sliding the cover. The mark on the cover should now line up with the second mark on the case of the computer.

Lift the bottom cover to remove it.

Step 4

              Fan
  • Remove the three Phillips screws securing the fan on the right.
  • Carefully unplug the fan’s power connector.
  • Remove the first fan.

Remove the three Phillips screws securing the fan on the right.

Carefully unplug the fan’s power connector.

Remove the first fan.

Step 5

              Fan and Heatsink Assembly
  • Remove the two Phillips screws securing the left hand fan.
  • Remove the six Phillips heatsink retaining screws .
  • Carefully unplug the fan’s power connector.
  • Using the two black tabs as handles, lift and remove the heatsink.

Remove the two Phillips screws securing the left hand fan.

Remove the six Phillips heatsink retaining screws .

Using the two black tabs as handles, lift and remove the heatsink.

Step 6

              CPU
  • Carefully pull the metal bar away from the processor to free it from under the retaining tab, then lift it to release the processor pins.
  • Gently remove the processor by lifting it straight up.

Carefully pull the metal bar away from the processor to free it from under the retaining tab, then lift it to release the processor pins.

Gently remove the processor by lifting it straight up.

To reassemble your device, follow the instructions in reverse order.

Cancel: I did not complete this guide.

        Jerry W is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Jerry W

Author

                                      with 1 other contributor 


                    Felice Suglia

Member since: 06/15/2013

28,552 Reputation

                                      243 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges