Difficulty

Moderate

Steps

16

Time Required

                          30 minutes

Sections

10

  • Battery
  • 1 step
  • Access to main components
  • 2 steps
  • SSD M.2 disk
  • 1 step
  • Hard disk (mass storage)
  • 1 step
  • BIOS stack
  • 1 step
  • WLAN card
  • 1 step
  • RAM Memory
  • 1 step
  • The fan
  • 1 step
  • The keyboard
  • 2 steps
  • Motherboard
  • 5 steps

Flags

4

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Better Introduction

Improve this guide by completing or revising its introduction.

  • Backwhy! N240JU

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Start by unlocking the right locking latch.
  • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

Start by unlocking the right locking latch.

Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

1024

Step 2

              Access to main components
  • Begin by spotting the dummy memory card.
  • Then, remove it and put it on your workplan.

Begin by spotting the dummy memory card.

Then, remove it and put it on your workplan.

Step 3

  • Locate the 15 screws that hold the bottom cover of the device in place.
  • Unscrew them and place them on your work surface.
  • Then, un-clip the bottom cover, starting with the side shown in the third picture.

Locate the 15 screws that hold the bottom cover of the device in place.

Unscrew them and place them on your work surface.

Then, un-clip the bottom cover, starting with the side shown in the third picture.

Step 4

              SSD M.2 disk
  • Locate the M.2 SSD in its slot.
  • Unscrew the fastening screw of the latter.
  • Lift and remove the SSD M.2 drive from its connector.

Locate the M.2 SSD in its slot.

Unscrew the fastening screw of the latter.

Lift and remove the SSD M.2 drive from its connector.

Step 5

              Hard disk (mass storage)
  • Locate the hard drive in its location.
  • Lift it slightly.
  • Finally remove it from its SATA connector.

Locate the hard drive in its location.

Lift it slightly.

Finally remove it from its SATA connector.

Step 6

              BIOS stack
  • To reassemble your device, follow the instructions in reverse order.
  • Lift it gently and take it out of its place.

To reassemble your device, follow the instructions in reverse order.

Lift it gently and take it out of its place.

Step 7

              WLAN card
  • Carefully unplug the MAIN and AUX antennas.
  • Unscrew the fixing screw with the Philips # 0 screwdriver. Then lift the chipset slightly and remove it from the connector.

Carefully unplug the MAIN and AUX antennas.

Unscrew the fixing screw with the Philips # 0 screwdriver. Then lift the chipset slightly and remove it from the connector.

Step 8

              RAM Memory
  • Find and separate the spring blades that maintain the memory module in place (right).
  • Find and separate the spring blades that maintain the memory module in place (left).
  • Remove the memory module (RAM) from its connector.

Find and separate the spring blades that maintain the memory module in place (right).

Find and separate the spring blades that maintain the memory module in place (left).

Remove the memory module (RAM) from its connector.

Step 9

              The fan
  • Remove the power cable from the fan.
  • Unscrew the two screws securing the fan.
  • Finally remove the fan and place it on your worktop.

Remove the power cable from the fan.

Unscrew the two screws securing the fan.

Finally remove the fan and place it on your worktop.

Step 10

              The keyboard
  • Unscrew the circled screws in green and red
  • Put the computer in the position of the second image while pushing a paper clip into the hole of the screw circled in green until you hear a click
  • Lift the keyboard

Unscrew the circled screws in green and red

Put the computer in the position of the second image while pushing a paper clip into the hole of the screw circled in green until you hear a click

Lift the keyboard

Step 11

  • Disconnect the connector circled in red in the direction of the arrow

Disconnect the connector circled in red in the direction of the arrow

Step 12

              Motherboard
  • Locate the two flat cables and remove them carefully.

Locate the two flat cables and remove them carefully.

Step 13

  • Locate the five connectors on the motherboard
  • Unplug all connectors

Locate the five connectors on the motherboard

Unplug all connectors

Step 14

  • Unplug all connectors

Step 15

  • Unscrew the four screws circled in red
  • Lift the motherboard by taking it through the radiator

Unscrew the four screws circled in red

Lift the motherboard by taking it through the radiator

Step 16

  • Disconnect the two connectors circled in red

Disconnect the two connectors circled in red

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        irlanda is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

irlanda

Author

                                      with 1 other contributor 


                    Felice Suglia

Member since: 06/15/2013

28,552 Reputation

                                      243 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges