Difficulty

Moderate

Steps

19

Time Required

                          30 minutes

Sections

3

  • Battery
  • 1 step
  • Access to main components
  • 2 steps
  • LCD screen
  • 16 steps

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • Backwhy! N240BU

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Start by unlocking the right locking latch.
  • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

Start by unlocking the right locking latch.

Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

1024

Step 2

              Access to main components
  • Begin by spotting the dummy memory card.
  • Then, remove it and put it on your workplan.

Begin by spotting the dummy memory card.

Then, remove it and put it on your workplan.

Step 3

  • Locate the 15 screws that hold the bottom cover of the device in place.
  • Unscrew them and place them on your work surface.
  • Then, un-clip the bottom cover, starting with the side shown in the third picture.

Locate the 15 screws that hold the bottom cover of the device in place.

Unscrew them and place them on your work surface.

Then, un-clip the bottom cover, starting with the side shown in the third picture.

Step 4

              LCD screen
  • In order to remove the LCD screen, you must remove the connection cables from the Wi-Fi chipset.
  • Then locate the two connectors on the LCD screen.
  • Disconnect the first connector.

In order to remove the LCD screen, you must remove the connection cables from the Wi-Fi chipset.

Then locate the two connectors on the LCD screen.

Disconnect the first connector.

Step 5

  • Peel off the tape from the second connector.
  • Then disconnect the second connector.
  • Locate the SSD M.2 drive.

Peel off the tape from the second connector.

Then disconnect the second connector.

Locate the SSD M.2 drive.

Step 6

  • Then dismount this disk because it must release the connection cables of the Wi-Fi chipset.
  • Free Wi-Fi connection cables now
  • Now locate the two screws that secure the screen to the rest of the Laptop (fan side)

Then dismount this disk because it must release the connection cables of the Wi-Fi chipset.

Free Wi-Fi connection cables now

Now locate the two screws that secure the screen to the rest of the Laptop (fan side)

Step 7

  • Now locate the two screws that secure the screen to the rest of the Laptop (the other side).
  • Then lift the Laptop as shown in the second image of this step.
  • Unscrew the first screw.

Now locate the two screws that secure the screen to the rest of the Laptop (the other side).

Then lift the Laptop as shown in the second image of this step.

Unscrew the first screw.

Step 8

  • Then unscrew the second screw.
  • Rest the Laptop as shown in the second image of this step and unscrew the third screw.
  • Then the fourth screw.

Then unscrew the second screw.

Rest the Laptop as shown in the second image of this step and unscrew the third screw.

Then the fourth screw.

Step 9

  • With the four screws unscrewed, separate the screen from the rest of the Laptop. Note that the hinge remains attached to the screen.
  • On the screen near the hinge now locate the two caches screws on the left.
  • Then look for those on the right.

With the four screws unscrewed, separate the screen from the rest of the Laptop. Note that the hinge remains attached to the screen.

On the screen near the hinge now locate the two caches screws on the left.

Then look for those on the right.

Step 10

  • Now remove the screw covers near the left hinge.
  • first on the right side of the hinge.
  • then on the left side.

Now remove the screw covers near the left hinge.

first on the right side of the hinge.

then on the left side.

Step 11

  • Repeat near the right hinge
  • .Now return to the hinge on the left side and unscrew the outer screw.

Repeat near the right hinge

.Now return to the hinge on the left side and unscrew the outer screw.

Step 12

  • Then unscrew the inner screw.
  • Repeat on the side of the right hinge.

Then unscrew the inner screw.

Repeat on the side of the right hinge.

Step 13

  • You can now gently unclip the screen cover.
  • Locate the left hinge screw cover.
  • Locate the right hinge screw cover.

You can now gently unclip the screen cover.

Locate the left hinge screw cover.

Locate the right hinge screw cover.

Step 14

  • Gently remove the screw cover on the left hinge.
  • Also remove the screw cover on the right hinge.
  • Once the screw caps are removed you will see the fixing screws.

Gently remove the screw cover on the left hinge.

Also remove the screw cover on the right hinge.

Once the screw caps are removed you will see the fixing screws.

Step 15

  • Now unscrew the screw on the left hinge.
  • Then unscrew the screw on the right hinge.
  • Once this is done you can now remove the hinge cover (left).

Now unscrew the screw on the left hinge.

Then unscrew the screw on the right hinge.

Once this is done you can now remove the hinge cover (left).

Step 16

  • Left hinged cover removed.
  • Then remove the cover from the right hinge.
  • Right hinge cover removed.

Left hinged cover removed.

Then remove the cover from the right hinge.

Right hinge cover removed.

Step 17

  • once these operations are done you see the LCD screen ready to be dismounted.
  • Now locate the screws that secure the LCD screen to the bracket and unscrew them. Two on the left.
  • Two on the right.

once these operations are done you see the LCD screen ready to be dismounted.

Now locate the screws that secure the LCD screen to the bracket and unscrew them. Two on the left.

Two on the right.

Step 18

  • Once the screws are unscrewed, lift the LCD screen gently and flip it over.
  • You will then see the connection cable of the screen.
  • Locate its connector.

Once the screws are unscrewed, lift the LCD screen gently and flip it over.

You will then see the connection cable of the screen.

Locate its connector.

Step 19

  • Disconnect the cable.
  • And here you can now put it on your work plan.

Disconnect the cable.

And here you can now put it on your work plan.

To reassemble your device, Follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        irlanda is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

irlanda

Author

                                      with 1 other contributor 


                    Felice Suglia

Member since: 06/15/2013

28,552 Reputation

                                      243 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges