Difficulty

Moderate

Steps

5

Time Required

                          10 minutes

Sections

2

  • N131WU Laptop Access to main components
  • 4 steps
  • Battery
  • 1 step

Flags

3

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • Backwhy! (Eluktronics) N131WU Laptop

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Remove the Screws
  • Remove the case screws (red) and the keyboard screws (green).
  • Be sure not to lose these screws. You will need them to reassemble your laptop.

Remove the case screws (red) and the keyboard screws (green).

Be sure not to lose these screws. You will need them to reassemble your laptop.

1024

Step 2

              Remove the Keyboard
  • Using the hole provided under the case (see picture), push the keyboard out using a thin screwdriver or some other solid object.
  • Hold onto the keyboard as you push the keyboard so as not to damage the two cables still attached.

Using the hole provided under the case (see picture), push the keyboard out using a thin screwdriver or some other solid object.

Hold onto the keyboard as you push the keyboard so as not to damage the two cables still attached.

Step 3

              Remove Keyboard Connections
  • (Blue Cable) Push up on the thin black portion on the connector and gently pull out the blue ribbon cable until it comes out.
  • (Orange Cable) Remove the orange cable by sliding the gray part of the connector towards the screen, then gently pull on the ribbon cable.

(Blue Cable) Push up on the thin black portion on the connector and gently pull out the blue ribbon cable until it comes out.

(Orange Cable) Remove the orange cable by sliding the gray part of the connector towards the screen, then gently pull on the ribbon cable.

Step 4

              Remove the upper screws
  • Unscrew the three screws that were under the keyboard. Be sure to hold onto these.
  • After these are removed, you can now remove the lower part of the case from the rest of the computer.

Unscrew the three screws that were under the keyboard. Be sure to hold onto these.

After these are removed, you can now remove the lower part of the case from the rest of the computer.

Step 5

              Battery
  • Remove the five Phillips screws securing the battery.
  • Unplug the power connector and lift the battery out in the direction of the arrows to remove it.

Remove the five Phillips screws securing the battery.

Unplug the power connector and lift the battery out in the direction of the arrows to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        Jerry W is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Jerry W

Author

                                      with 2 other contributors 


                    Felice Suglia

Member since: 06/15/2013

28,552 Reputation

                                      243 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges

La Puce A l’Oreille - Apr 28, 2022

Reply

Merci beaucoup, tutoriel très bien fait qui nous a beaucoup aidé !