Canon Powershot Sx160 Is Function Wheel Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          15 - 30 minutes            

Sections

1

• Function Wheel
• 4 steps

Flags

0

• BackCanon PowerShot SX160 IS

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Function Wheel               

• Unscrew the 2-4.8mm black Phillips head screws from the front of the camera using a #0 Phillips screwdriver.
• Unscrew the 2-4.8mm black Phillips head screws from the side of the camera using a #0 Phillips screwdriver.
• Unscrew the 3-4.8mm black Phillips head screws from the bottom of the camera using a #0 Phillips screwdriver.

Unscrew the 2-4.8mm black Phillips head screws from the front of the camera using a #0 Phillips screwdriver.

Unscrew the 2-4.8mm black Phillips head screws from the side of the camera using a #0 Phillips screwdriver.

Unscrew the 3-4.8mm black Phillips head screws from the bottom of the camera using a #0 Phillips screwdriver.

1024

Step 2

• Using your hands, gently separate the back panel from the camera.
• Continue to pull the back panel until it completely detaches from the camera.

Using your hands, gently separate the back panel from the camera.

Continue to pull the back panel until it completely detaches from the camera.

Step 3

• Use a #0 phillips screwdriver to unscrew the 3-3.75mm silver Phillips head screws from the function wheel panel of the camera.

Use a #0 phillips screwdriver to unscrew the 3-3.75mm silver Phillips head screws from the function wheel panel of the camera.

Step 4

• Remove and replace the function wheel.

Remove and replace the function wheel.

Congratulations, you have successfully replaced your function wheel. To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Jamie Secretan                     

Member since: 03/11/2015

1,885 Reputation

                                      6 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       Colorado Springs, Team 2-3, Panko Spring 2015                        

                                                  Member of Colorado Springs, Team 2-3, Panko Spring 2015 



                    UCCS-PANKO-S15S2G3                     


                                            3 Members                     


                                            6 Guides authored                     

Denise Domian - Jan 23, 2021

Reply

Hi, I replaced the LCD screen but now my function wheel and panel don’t work. I think the ribbon got disconnected , but I can’t figure out where to attach it. Can you help?